NVDA 2015.1 & 2014.4
Accessibility issues
Issues were encountered with the Capture Method dropdown and the Conversion
Settings dropdown controls.
But if you want to capture your media Replay Media Catcher 6 works well. If
you need your media in MP3 format simply locate the file in the list and
press ctrl+m and this will convert the captured media file to MP3.
---
This email has been checked for viruses by Avast antivirus software.
http://www.avast.com
Friday, February 27, 2015
Replay Media Catcher 6 & Audio Recorder
Applian support said,
To use the Audio Recorder in "Application" recording mode in RMC6, yes,
SecureBoot has to be turned off for Windows 8 systems. This requires
navigating the UEFI BIOS of your computer, and the layout of the BIOS can
vary depending on manufacturer.
on all Windows versions, our installer is setup to change a few Windows
Registry values in order for the "Application" recording method to be used.
In some cases, antivirus software may prevent or reset those values. If
that happens, a warning message will be displayed.
If you use the Audio Recorder in Stereo Mix or Device mode, the above
conditions do not need to be met, but the recording quality may not be as
good.
BlindReplay says,
The Replay Media Catcher 6 User Guide explains how to do the secure boot
configuration. The user guide link is in one of my previous blog posts.
---
This email has been checked for viruses by Avast antivirus software.
http://www.avast.com
To use the Audio Recorder in "Application" recording mode in RMC6, yes,
SecureBoot has to be turned off for Windows 8 systems. This requires
navigating the UEFI BIOS of your computer, and the layout of the BIOS can
vary depending on manufacturer.
on all Windows versions, our installer is setup to change a few Windows
Registry values in order for the "Application" recording method to be used.
In some cases, antivirus software may prevent or reset those values. If
that happens, a warning message will be displayed.
If you use the Audio Recorder in Stereo Mix or Device mode, the above
conditions do not need to be met, but the recording quality may not be as
good.
BlindReplay says,
The Replay Media Catcher 6 User Guide explains how to do the secure boot
configuration. The user guide link is in one of my previous blog posts.
---
This email has been checked for viruses by Avast antivirus software.
http://www.avast.com
Thursday, February 26, 2015
Replay Media Catcher 6 User Guide
Replay Media Catcher 6
User Guide
http://applian.com/replay-media-catcher/support/user_guide600
---
This email has been checked for viruses by Avast antivirus software.
http://www.avast.com
User Guide
http://applian.com/replay-media-catcher/support/user_guide600
---
This email has been checked for viruses by Avast antivirus software.
http://www.avast.com
Replay Media Catcher 6 & NVDA tip
If you capture just one media with Replay Media Catcher 6 and are using NVDA
screen reader you may not hear the file that is hsown in the RMC6 list so
either do the following to view the list;
- Capture another media and you will see two entries in your list. The list
will function normal now in regular mode.
- use your screen review cursor insert+num pad 7 and you will hear the entry
in the list
- go to your hard drive folder where files are stored and you will find your
file there
---
This email has been checked for viruses by Avast antivirus software.
http://www.avast.com
screen reader you may not hear the file that is hsown in the RMC6 list so
either do the following to view the list;
- Capture another media and you will see two entries in your list. The list
will function normal now in regular mode.
- use your screen review cursor insert+num pad 7 and you will hear the entry
in the list
- go to your hard drive folder where files are stored and you will find your
file there
---
This email has been checked for viruses by Avast antivirus software.
http://www.avast.com
Tuesday, February 24, 2015
Replay Media Catcher 6 Accessibility
RMC6 using NVDA and Windows XP or Vista did very well with RMC6 Settings
area and I never lost focus. For example, NVDA always read back to me
whether a switch was on or off within any of the settings found within its
five tab property sheets like in the Personalization, Output folder,
Internet Download, Audio Recordings, DVR and Naming tabs. But with JAWS
after a certain amount of time has passed it will lose focus with the main
tab controls (Home, Guides, Schedule, Settings, Get Support) and the
Settings interface will lose focus as the user has no idea if a control is
on or off (enabled / disabled). In the settings it would say it some places
'1' instead of switch is on / off. I really have not checked to see if the 1
means ON and possibly 0 means OFF. When I was learning about computers it
used to mean 0 meant off and 1 meant ON but not sure here. As a blind PC
user I have to find ways to find a fix so I used NVDA to set my settings as
it does a better job handling this then JAWS. If the blind user only uses
JAWS tell them to exit RMC6 and re-run RMC6 and go to the settings area and
set his settings before focused is lost. I told someone at Applian I would
give RMC6 a grade of C a few weeks ago but since that time I would give it a
grade of B- because of the available keyboard shortcuts and the ability to
import media files into the list view box which allows one to convert those
files. The RMC6 program does work and captures what I need to capture. I
have no way of knowing if there are more issues when using Windows 7 64 bit
OS.
On the main user interface if you want to know if the Audio Recorder
recording mode is at the stert recording or stop recording position simply
press shift+tab and tab to re-hear the mode or use alt+r to start reocrding
and press alt+r again to stop recording while using the Audio Recorder. If
you are using the Stream Downloader use alt+x and pay attention to the sound
affect beep and alt+x to stop the stream downloader mode to stop capturing.
If one is having an issue finding the list view box / area where the
captured files appear tell the user to press ctrl+l to go to the URL field
and then tab 3 times and press the up arrow and you will hear the list box
contents. This works for me. Or look for the show in folder or properties on
the main user interface and shift+tab and you will find the list box view.
Who are these other users who have issues with RMC6? Tell them to contact me
by email message. If you cannot find the list view contents you can go to
the hard drive folder where your captures are stored. There while in the
list you can press your F5 key to examine the file size progress download
size and listen to your computer for the sound beeps RMC6 will make when
each and every capture is finished for you. Again I do not know if there are
significant issues using RMC6 with Windows 7. As a blind PC user I have to
find alternative methods / skills to use a particular piece of software. I
did mention the focus issues to Applian but I understand it could be the
screen reader at some fault too. The RMC6 Guides tab control and its usage
needs work / improvements when it comes to using it. To import a file into
RMC6 use alt+i keystroke as drag n drop is difficult.
RMC6 is also a media file converter program.
Takes time to learn this program.
Read the user guide.
Please pass this on to any mailing list you are a member of to assist the
blind RMC6 user.
---
This email has been checked for viruses by Avast antivirus software.
http://www.avast.com
area and I never lost focus. For example, NVDA always read back to me
whether a switch was on or off within any of the settings found within its
five tab property sheets like in the Personalization, Output folder,
Internet Download, Audio Recordings, DVR and Naming tabs. But with JAWS
after a certain amount of time has passed it will lose focus with the main
tab controls (Home, Guides, Schedule, Settings, Get Support) and the
Settings interface will lose focus as the user has no idea if a control is
on or off (enabled / disabled). In the settings it would say it some places
'1' instead of switch is on / off. I really have not checked to see if the 1
means ON and possibly 0 means OFF. When I was learning about computers it
used to mean 0 meant off and 1 meant ON but not sure here. As a blind PC
user I have to find ways to find a fix so I used NVDA to set my settings as
it does a better job handling this then JAWS. If the blind user only uses
JAWS tell them to exit RMC6 and re-run RMC6 and go to the settings area and
set his settings before focused is lost. I told someone at Applian I would
give RMC6 a grade of C a few weeks ago but since that time I would give it a
grade of B- because of the available keyboard shortcuts and the ability to
import media files into the list view box which allows one to convert those
files. The RMC6 program does work and captures what I need to capture. I
have no way of knowing if there are more issues when using Windows 7 64 bit
OS.
On the main user interface if you want to know if the Audio Recorder
recording mode is at the stert recording or stop recording position simply
press shift+tab and tab to re-hear the mode or use alt+r to start reocrding
and press alt+r again to stop recording while using the Audio Recorder. If
you are using the Stream Downloader use alt+x and pay attention to the sound
affect beep and alt+x to stop the stream downloader mode to stop capturing.
If one is having an issue finding the list view box / area where the
captured files appear tell the user to press ctrl+l to go to the URL field
and then tab 3 times and press the up arrow and you will hear the list box
contents. This works for me. Or look for the show in folder or properties on
the main user interface and shift+tab and you will find the list box view.
Who are these other users who have issues with RMC6? Tell them to contact me
by email message. If you cannot find the list view contents you can go to
the hard drive folder where your captures are stored. There while in the
list you can press your F5 key to examine the file size progress download
size and listen to your computer for the sound beeps RMC6 will make when
each and every capture is finished for you. Again I do not know if there are
significant issues using RMC6 with Windows 7. As a blind PC user I have to
find alternative methods / skills to use a particular piece of software. I
did mention the focus issues to Applian but I understand it could be the
screen reader at some fault too. The RMC6 Guides tab control and its usage
needs work / improvements when it comes to using it. To import a file into
RMC6 use alt+i keystroke as drag n drop is difficult.
RMC6 is also a media file converter program.
Takes time to learn this program.
Read the user guide.
Please pass this on to any mailing list you are a member of to assist the
blind RMC6 user.
---
This email has been checked for viruses by Avast antivirus software.
http://www.avast.com
Monday, February 23, 2015
Replay Media Catcher 6 & Settings Keyboard Shortcut
To quickly access Replay Media Catcher 6 Settings use the keyboard shortcut
ctrl + s
---
This email has been checked for viruses by Avast antivirus software.
http://www.avast.com
ctrl + s
---
This email has been checked for viruses by Avast antivirus software.
http://www.avast.com
Sunday, February 22, 2015
Replay Media Catcher 6 Key Keyboard Shortcuts
Replay Media Catcher 6
Keyboard Shortcuts that you can use
While in Stream Downloader mode
Works for me
Alt + X = Start or Stop Auto mode Stream Downloading
ctrl+l open URL edit field
While in the Audio Recorder mode
Works for me
Alt + R = Start or Stop audio recording
Have not tested but should work
Alt + S = Split audio recording
---
This email has been checked for viruses by Avast antivirus software.
http://www.avast.com
Keyboard Shortcuts that you can use
While in Stream Downloader mode
Works for me
Alt + X = Start or Stop Auto mode Stream Downloading
ctrl+l open URL edit field
While in the Audio Recorder mode
Works for me
Alt + R = Start or Stop audio recording
Have not tested but should work
Alt + S = Split audio recording
---
This email has been checked for viruses by Avast antivirus software.
http://www.avast.com
Replay media Catcher 6 & Blind user tips
My experience and opinions only.
Replay Media Catcher 6
If you want to set the settings use NVDA as JAWS sometimes will lose focus
with the settings window. The fix is to exit out of RMC6 and run RMC6 and go
to the settings. You will hear after each setting feature the screen reader
say the word switch is on or off. So on means its enabled and off means it
not enabled / not selected. To rehear your setting do a shift+tab then a tab
and you will hear the on / off. Once you have set the settings to your
personal preferences you will not need to tinker with the settings in the
future.
On the main user interface of RMC6 there is a list of tab controls and think
of these as controls. Again, JAWS 16 will lose focus on these tab controls
but can still be found and heard. NVDA never loses focus of these tab
controls. The tab controls are in this order;
Home H
Guides G
Schedule S
Settings S
Get Support G
The tab controls mentioned above can be found by tabbing to and then
stopping at where you hear the screen reader say "When the switch is on
media streams orif you have stopped tabbing and re-reads the item with JAWS
insert+tab it will say Automatically detect and download... When you hear
this by your screen reader simply shift+tab one time and then down arrow you
will hear one of the tab controls like;
Home H
Guides G
Schedule S
Settings S
Get Support G
The reason I have provided the one letter after each tab controls name is
JAWS will lose focus with these tab control names but JAWS will say when
focus is lost the following as you up or down the tab controls as;
H which is your Home tab control
G which is your Guides tab control
S which is your Schedule tab control
S which is your settings tab control
G which is your Get Support tab control
So once on the tab control like the Settings simply tab two times and you
will hear or not hear the five tab property sheets that are available within
the settings Window. With JAWS do a insert+tab or insert+numpad 8 to hear
the actual tab sheet name as you navigate left or right on the tab sheets
that are sometime not read back. If you hear JAWS say 'selected' you are on
one of the tab sheets so do a insert+tab and you will hear the actual tab
sheet name you have focus on. You can do a ctrl+tab to jump to the next tab
sheet properties or Shift+ctrl+tab to go in reverse to the previous tab
sheet properties. All is not lost. It works when you know what to look for.
NVDA does not exhibit these issues in my testing.
The settings tab control tab sheets are;
Personalization
Output folder
Internet Downloads
Audio Recording
DVR
Naming Rules
Takes some practice with JAWS.
More tips
Your captures are always placed in this listbox and you must be within the
Home tab control area. One way to know if you are in the Home tab control
area is you will hear this URL edit field entry spoken as you tab around or
better yet always use the special and valuable shortcut key ctrl+l
This ctrl+l will place focus immediatly inside the URL address edit box
where you can paste in the URL address you want to capture. Once you have
pasted in the URL address with ctrl+v simply press your enter keyboard key
and the capture / download begins.
So Locate the Home tab control if you are lost. Again you can find this Home
tab ontrol or one of the other tab ontrols by first tabbing around and
listening for the the Switch is on the media... or when stopped tabbing and
re-reads the element you will hear Automatically detect and download... so
shift+tab one time from here and then down arrow and locate the Home tab
control. When you have focus on the Home tab control simply shift+tab a few
times to hear the listbox view. This is where your captures / recordings are
shown.
If you are using JAWS and focus is lost listen for the letter H and this
tells you that you are on the Home tab control and then shift+tab a few
times to locate the listbox view. If you happen to hear as you are
shift+tabbing the following items then a capture as occurred;
properties
show in folder
play
and maybe one or two other items that I cannot remember at this time you are
all good.
Another tip
You must be in the Home H tab control to find the When the Switch is on...
item as you tab around. When you hear this When the Switch is on item simply
press your spacebar to activate the start mode. This start mode will make a
sound effect for you. This tells the user its ready to capture your media
streams on the fly so go to your browser and test some media you want to
capture.
Your captures will appear in the Home tab control listbox view.
To stop the Start mode process simply locate where your screen reader says
the When the Switch is on media streams ... and press spacebar and you will
hear the stop sound effect.
Note:
The first time you try to capture you will get this pop up setting message
asking you on how you want the captures. So set the settings. Believe they
were like Hi, medium and low and media formats like MP4, FLV aand some other
formats. Also if you need to tweek These settings you can go later on to the
Settings tab control > Internet Downloads tab sheet properties. You will
hear when multiple streams... and formats...
Use your insert+tab or insert+numpad8 with JAWS to re-read the control that
you have focus on.
New tip
Say you want to capture just one media and its a URL address you have copied
with ctrl+c then you can simply press ctrl+l and the URL edit box appears
for you. simply paste in the URL with ctrl+v and hit your ENTER keyboard key
to activate the capture. Press your tab key 3 times and you will hear the
list view box. The file will be shown in this list box view. You must be
inside the Home tab control center to hear this list box view. You cannot be
for example within the settings tab control center to hear this list box
view.
New Tip
To capture in a different mode locate the Capture Method control while
within the Home tab control center. The screen reader will say Capture
Method button and this is it. Press your spacebar and you will hear;
Stream Downloader and this is the default.
Audio Recorder - use this when stream downloader does not work but it will
be a second by second, bit by bit recording.
Digital Video Recorder
Choose the option you need.
If you have chosen the Audio Recorder option the user interface will change.
Notice the split recording and start recording buttons? After you have
pressed the start rcording button with spacebar simply press shift+tab and
then tab to re-read the start recording button and you will hear it say
stop recording button because this is a toggle button.
When the DVr is chosen try pressing ctrl+l to open the URL edit field box,
paste in the URL and press enter key to capture.
I was told the buttons within the DVR are not labeled for screen reader
users. There are 3 unlabeled buttons.
---
This email has been checked for viruses by Avast antivirus software.
http://www.avast.com
Replay Media Catcher 6
If you want to set the settings use NVDA as JAWS sometimes will lose focus
with the settings window. The fix is to exit out of RMC6 and run RMC6 and go
to the settings. You will hear after each setting feature the screen reader
say the word switch is on or off. So on means its enabled and off means it
not enabled / not selected. To rehear your setting do a shift+tab then a tab
and you will hear the on / off. Once you have set the settings to your
personal preferences you will not need to tinker with the settings in the
future.
On the main user interface of RMC6 there is a list of tab controls and think
of these as controls. Again, JAWS 16 will lose focus on these tab controls
but can still be found and heard. NVDA never loses focus of these tab
controls. The tab controls are in this order;
Home H
Guides G
Schedule S
Settings S
Get Support G
The tab controls mentioned above can be found by tabbing to and then
stopping at where you hear the screen reader say "When the switch is on
media streams orif you have stopped tabbing and re-reads the item with JAWS
insert+tab it will say Automatically detect and download... When you hear
this by your screen reader simply shift+tab one time and then down arrow you
will hear one of the tab controls like;
Home H
Guides G
Schedule S
Settings S
Get Support G
The reason I have provided the one letter after each tab controls name is
JAWS will lose focus with these tab control names but JAWS will say when
focus is lost the following as you up or down the tab controls as;
H which is your Home tab control
G which is your Guides tab control
S which is your Schedule tab control
S which is your settings tab control
G which is your Get Support tab control
So once on the tab control like the Settings simply tab two times and you
will hear or not hear the five tab property sheets that are available within
the settings Window. With JAWS do a insert+tab or insert+numpad 8 to hear
the actual tab sheet name as you navigate left or right on the tab sheets
that are sometime not read back. If you hear JAWS say 'selected' you are on
one of the tab sheets so do a insert+tab and you will hear the actual tab
sheet name you have focus on. You can do a ctrl+tab to jump to the next tab
sheet properties or Shift+ctrl+tab to go in reverse to the previous tab
sheet properties. All is not lost. It works when you know what to look for.
NVDA does not exhibit these issues in my testing.
The settings tab control tab sheets are;
Personalization
Output folder
Internet Downloads
Audio Recording
DVR
Naming Rules
Takes some practice with JAWS.
More tips
Your captures are always placed in this listbox and you must be within the
Home tab control area. One way to know if you are in the Home tab control
area is you will hear this URL edit field entry spoken as you tab around or
better yet always use the special and valuable shortcut key ctrl+l
This ctrl+l will place focus immediatly inside the URL address edit box
where you can paste in the URL address you want to capture. Once you have
pasted in the URL address with ctrl+v simply press your enter keyboard key
and the capture / download begins.
So Locate the Home tab control if you are lost. Again you can find this Home
tab ontrol or one of the other tab ontrols by first tabbing around and
listening for the the Switch is on the media... or when stopped tabbing and
re-reads the element you will hear Automatically detect and download... so
shift+tab one time from here and then down arrow and locate the Home tab
control. When you have focus on the Home tab control simply shift+tab a few
times to hear the listbox view. This is where your captures / recordings are
shown.
If you are using JAWS and focus is lost listen for the letter H and this
tells you that you are on the Home tab control and then shift+tab a few
times to locate the listbox view. If you happen to hear as you are
shift+tabbing the following items then a capture as occurred;
properties
show in folder
play
and maybe one or two other items that I cannot remember at this time you are
all good.
Another tip
You must be in the Home H tab control to find the When the Switch is on...
item as you tab around. When you hear this When the Switch is on item simply
press your spacebar to activate the start mode. This start mode will make a
sound effect for you. This tells the user its ready to capture your media
streams on the fly so go to your browser and test some media you want to
capture.
Your captures will appear in the Home tab control listbox view.
To stop the Start mode process simply locate where your screen reader says
the When the Switch is on media streams ... and press spacebar and you will
hear the stop sound effect.
Note:
The first time you try to capture you will get this pop up setting message
asking you on how you want the captures. So set the settings. Believe they
were like Hi, medium and low and media formats like MP4, FLV aand some other
formats. Also if you need to tweek These settings you can go later on to the
Settings tab control > Internet Downloads tab sheet properties. You will
hear when multiple streams... and formats...
Use your insert+tab or insert+numpad8 with JAWS to re-read the control that
you have focus on.
New tip
Say you want to capture just one media and its a URL address you have copied
with ctrl+c then you can simply press ctrl+l and the URL edit box appears
for you. simply paste in the URL with ctrl+v and hit your ENTER keyboard key
to activate the capture. Press your tab key 3 times and you will hear the
list view box. The file will be shown in this list box view. You must be
inside the Home tab control center to hear this list box view. You cannot be
for example within the settings tab control center to hear this list box
view.
New Tip
To capture in a different mode locate the Capture Method control while
within the Home tab control center. The screen reader will say Capture
Method button and this is it. Press your spacebar and you will hear;
Stream Downloader and this is the default.
Audio Recorder - use this when stream downloader does not work but it will
be a second by second, bit by bit recording.
Digital Video Recorder
Choose the option you need.
If you have chosen the Audio Recorder option the user interface will change.
Notice the split recording and start recording buttons? After you have
pressed the start rcording button with spacebar simply press shift+tab and
then tab to re-read the start recording button and you will hear it say
stop recording button because this is a toggle button.
When the DVr is chosen try pressing ctrl+l to open the URL edit field box,
paste in the URL and press enter key to capture.
I was told the buttons within the DVR are not labeled for screen reader
users. There are 3 unlabeled buttons.
---
This email has been checked for viruses by Avast antivirus software.
http://www.avast.com
Saturday, February 21, 2015
Replay Media Catcher 6.0.0.60 Download
Replay Media Catcher 6.0.0.60
Download
http://applian.com/replay-media-catcher/download
---
This email has been checked for viruses by Avast antivirus software.
http://www.avast.com
Download
http://applian.com/replay-media-catcher/download
---
This email has been checked for viruses by Avast antivirus software.
http://www.avast.com
Replay Music 7.0.0.60 Download
Replay Music 7.0.0.60
Download
http://applian.com/replay-music/download
---
This email has been checked for viruses by Avast antivirus software.
http://www.avast.com
Download
http://applian.com/replay-music/download
---
This email has been checked for viruses by Avast antivirus software.
http://www.avast.com
Friday, February 20, 2015
Replay Media Catcher 6.0.0.59 Additional Shortcut
Soon to be added keyboard shortcut.
ctrl+l - jump to the URL field edit so you can paste in the URL address for
your media.
JAWS 16 user. Blind info.
---
This email has been checked for viruses by Avast antivirus software.
http://www.avast.com
ctrl+l - jump to the URL field edit so you can paste in the URL address for
your media.
JAWS 16 user. Blind info.
---
This email has been checked for viruses by Avast antivirus software.
http://www.avast.com
Thursday, February 19, 2015
Replay Media Catcher 6 Keyboard Shortcuts
Replay Media Catcher 6.0.0.56
Keyboard Shortcuts
Alt + X = Start or Stop Auto mode Stream Downloading
Alt + R = Start or Stop audio recording
Alt + S = Split audio recording
Escape = Cancel selected download
Del = Delete selected recording(s) from computer
F2 = Rename selected download/recording
Ctrl + R = Remove selected file(s) from the file listing, but don't delete
from compute
Enter = Play selected download/recording
Ctrl + C = Converted selected files to format specified in global conversion
settings
Ctrl + M = Converted selected files to MP3
Add = Combine multiple selected files
Ctrl + F = Fix FLV
F5 = Restart download (only possible for some download streams)
Ctrl + I = Import selected recording(s) into iTunes library
Ctrl + W = Import selected recording(s) into Windows Media Player library
Ctrl + O = Show selected file in Windows File Explorer
Alt + A = Show the album artwork in the Properties Window
Alt + L = Show the song lyrics in the Properties Window
Alt + T = Lookup ID3 tags (artist, song, album, etc) for selected song(s)
Alt + Enter = Open the download/recording properties window
Alt + I = Open file browser to Import songs into Replay Music
F1 = Open web browser to the Replay Media Catcher support page
Alt + F4 = Quit
Ctrl + S = Open Settings tab
---
This email has been checked for viruses by Avast antivirus software.
http://www.avast.com
Keyboard Shortcuts
Alt + X = Start or Stop Auto mode Stream Downloading
Alt + R = Start or Stop audio recording
Alt + S = Split audio recording
Escape = Cancel selected download
Del = Delete selected recording(s) from computer
F2 = Rename selected download/recording
Ctrl + R = Remove selected file(s) from the file listing, but don't delete
from compute
Enter = Play selected download/recording
Ctrl + C = Converted selected files to format specified in global conversion
settings
Ctrl + M = Converted selected files to MP3
Add = Combine multiple selected files
Ctrl + F = Fix FLV
F5 = Restart download (only possible for some download streams)
Ctrl + I = Import selected recording(s) into iTunes library
Ctrl + W = Import selected recording(s) into Windows Media Player library
Ctrl + O = Show selected file in Windows File Explorer
Alt + A = Show the album artwork in the Properties Window
Alt + L = Show the song lyrics in the Properties Window
Alt + T = Lookup ID3 tags (artist, song, album, etc) for selected song(s)
Alt + Enter = Open the download/recording properties window
Alt + I = Open file browser to Import songs into Replay Music
F1 = Open web browser to the Replay Media Catcher support page
Alt + F4 = Quit
Ctrl + S = Open Settings tab
---
This email has been checked for viruses by Avast antivirus software.
http://www.avast.com
Replay Media Catcher 6
Please read the user guide.
NEW RELEASE: Replay Media Catcher 6
Capture More Media Than Ever Before!
Our new Version 6 is better than ever, and you'll have the most advanced
video and audio downloading program on the planet. Here's what you get with
this HUGE upgrade:
a.. New DVR Recording Option: Capture encrypted video - legally! Pick from
popular web sites, and recordings take place real-time in the background.
Powerful and convenient.
b.. New Media Guides with Direct Downloads: Enter the name of a movie or
TV show, and Replay Media Catcher will scour the web to find you a download
file - removing most annoying pop-up ads.
c.. New Drag-and-drop Downloading: Simply drag a website URL from your
browser onto Replay Media Catcher 6 to start downloading. Also works with
copy & paste for fast queuing.
d.. Records More Video Formats: Replay Media Catcher is still the best way
to download videos using all the latest protocols.
e.. Enhanced Converter: Any video or audio downloaded or captured by
Replay Media Catcher 6 can be converted to many different formats.
f.. Improved Ad Blocking: Videos from our continuously updated list of ad
sites are no longer captured.
g.. And more! Easier-than-ever interface, and lots of other minor
improvements.
---
This email has been checked for viruses by Avast antivirus software.
http://www.avast.com
NEW RELEASE: Replay Media Catcher 6
Capture More Media Than Ever Before!
Our new Version 6 is better than ever, and you'll have the most advanced
video and audio downloading program on the planet. Here's what you get with
this HUGE upgrade:
a.. New DVR Recording Option: Capture encrypted video - legally! Pick from
popular web sites, and recordings take place real-time in the background.
Powerful and convenient.
b.. New Media Guides with Direct Downloads: Enter the name of a movie or
TV show, and Replay Media Catcher will scour the web to find you a download
file - removing most annoying pop-up ads.
c.. New Drag-and-drop Downloading: Simply drag a website URL from your
browser onto Replay Media Catcher 6 to start downloading. Also works with
copy & paste for fast queuing.
d.. Records More Video Formats: Replay Media Catcher is still the best way
to download videos using all the latest protocols.
e.. Enhanced Converter: Any video or audio downloaded or captured by
Replay Media Catcher 6 can be converted to many different formats.
f.. Improved Ad Blocking: Videos from our continuously updated list of ad
sites are no longer captured.
g.. And more! Easier-than-ever interface, and lots of other minor
improvements.
---
This email has been checked for viruses by Avast antivirus software.
http://www.avast.com
Replay Media Catcher 6 released
Released notice.
---
This email has been checked for viruses by Avast antivirus software.
http://www.avast.com
---
This email has been checked for viruses by Avast antivirus software.
http://www.avast.com
Subscribe to:
Posts (Atom)